Ultrasonic preparation of nano-nickel/activated carbon composite using spent electroless nickel plating bath and application in degradation of 2,6-dichlorophenol

Ni was effectively recovered from spent electroless nickel （EN） plating baths by forming a nano-nickel coated activated carbon composite. With the aid of ultrasonication, melamine- formaldehyde-tetraoxalyl-ethylenediamine chelating resins were grafted on activated carbon （MFT/AG）. PdC12 sol was adsorbed on MFT/AC, which was then immersed in spent electroless nickel plating bath; then nano-nickel could be reduced by ascorbic acid to form a nano-nickel coating on the activated carbon composite （Ni/AC） in situ. The materials present were carefully examined by Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, X-ray photoelectron spectroscopy and electro- chemistry techniques. The resins were well distributed on the inside and outside surfaces of activated carbon with a size of 120 ± 30 nm in MFT/AC, and a great deal of nano-nickel particles were evenly deposited with a size of 3.8 ± 1.1 nm in Ni/MFT. Moreover, Ni/AC was successfully used as a catalyst for ultrasonic degradation of 2.6-dichloronhenol.     

超声波去除农用污泥中重金属的试验研究

污水处理厂污泥中的重金属浓度高是污泥农用的主要障碍。为了降低农用污泥中的重金属含量,以Cu、Zn、Ni、Pb为对象,研究了超声波对其的影响。结果表明:超声对污泥中重金属有一定的溶出作用。当超声时间为30min时,溶解状态Cu、Zn、Ni、Pb的析出率分别为42.1%、37.5%、12.7%、14.7%;总的析出率分别为52.7%、44.7%、23.6%、71%。其中析出的Pb大部分以胶体状态存在,而溶解状态只占很少一部分。其他几种金属则以溶解状态为主。     

浅谈进口智能仪表在污水处理厂的使用和维护

对智能仪表的使用和维护进行了详细的介绍和讨论,指出使用智能仪表的优点及需要注意的具体事项并对仪表可能出现的问题进行了研究和探讨。     

几种压力容器在役监控技术及应用

介绍了若干压力容器在役监控技术的实例。声发射技术和超声检测是比较可行的监控技术。     

Improvement of the activity of anaerobic sludge by low-intensity ultrasound

This paper aims to study the enhancement effect of low-intensity ultrasound on anaerobic sludge activity and the efficiency of anaerobic wastewater treatment. Dehydrogenate activity (DHA) and the content of coenzyme F(420) were detected to indicate the change of activity of anaerobic sludge induced by ultrasound at 35 kHz. Single-factor and multiple-factor optimization experiments showed that the optimal ultrasonic intensity and irradiation period were 0.2 W/cm(2) and 10 min, respectively, and the biological activity was enhanced dramatically under the optimal condition. The chemical oxygen demand (COD) removal efficiency was increased by ultrasonic treatment and the COD in the effluent was 30% lower than that of the control (without exposure). The hypothetical mechanism of biological activity enhancement by ultrasound was also discussed according to the results.     

超声技术处理难降解有机物的影响因素

超声技术作为一种新型的氧化方法．能提高难降解有机物的降解率和增强水处理中的可生化性（BOD／COD）,在焦化等难降解废水处理中已经发挥了一定的作用并有广阔的发展前景。在此综述了超声空化降解难生物降解有机废水的机理和主要影响因素,并对超声技术在我国水处理中的应用前景提出自己的见解。     

超声波强化膜分离及清洗的研究进展

综述了超声波强化膜分离与膜清洗的机理,国内外超声波强化膜分离与清洗的研究现状以及影响该技术运用的问题所在。现有的研究成果表明:通过低功率超声波辐射处理污染膜可以减缓运行过程中的浓差极化及膜污染,而如何优化操作参数、如何减小超声波对膜体损害是近期的研究重点。     

污泥厌氧消化的强化处理技术

污泥固体的生物可降解性低 ,影响了污泥的厌氧消化 ,提高厌氧消化效率的一个主要途径是促进污泥细胞的分解 ,增强生物可降解性 ,本文综述了强化污泥厌氧消化的几种预处理技术 ,包括热解、碱处理、臭氧氧化和超声处理     

超声导波技术在长输管道跨越段腐蚀检测中的应用

管道跨越段的检测一直是管道检验检测的难题之一,本文运用英国TWI集团Teletest F0CUS+MK4导波设备,对某在役的长输管道,综合选择了河流、沟壑、高速公路、水渠等多种不同服役环境管段,管後DN200至DN350不等6个跨越段进行检测,并进行案例分析。实践表明,导波检测技术对跨越段管道的单边检测距离在100右,且对管体内外壁缺陷能够全覆盖检测;导波检测的可靠性能够满足实际工程的要求。     

An executive review of sludge pretreatment by sonication

Ultrasonication (US), which creates hydro-mechanical shear forces in cavitation, is an advanced technology in sludge pretreatment. However, there are many factors affecting the efficacy of cavitation and ultrasonication disintegration of sludge as a consequence. The objective of this work is to present an extensive review of evaluation approaches of sludge US pretreatment efficiency. Besides, optimization methodologies of related parameters, the differences of optimum values and the similarities of affecting trends on cavitation and sludge pretreatment efficiency were specifically pointed out, including ambient conditions, ultrasonic properties, and sludge characteristics. The research is a prerequisite for optimization of sludge US pretreatment efficiency in lab-scale and practical application. There is not-yet a comprehensive method to evaluate the efficiency of sludge US pretreatment, but some main parameters commonly used for this purpose are degree of sludge disintegration, proteins, particle size reduction, etc. Regarding US parameters, power input P_US, intensity I_US, and frequency F_S seem to have significant effects. However, the magnitude of the effect of P_US and probe size in terms of I_US has not been clearly detailed. Investigating very low F_S seems interesting but has not yet been taken into consideration. In addition, static pressure effect has been marginally studied only and investigation on the effect of pH prior to US process has been restricted. Their effects therefore should be varied separately and simultaneously with other related parameters, i.e. process conditions, ultrasonic properties, and sludge characteristics, to optimize sludge US pretreatment process.